|
Loon Outdoors Hard Head Fly Finish
A polyurethane based formula for building colourful, glossy heads and bodies, an alternative to epoxy, and suitable for toothy fish. Dries solid in one hour, though it is dry to the touch after... More Info>>
Item # Hardhead
|
£4.99 |
|
Loon Outdoors Soft Head
Builds heads and bodies. A water based, non toxic, odourless formula, that dries to a clear workable tack within 20 minutes. At this stage it can be handled with your fingers, if you wet them... More Info>>
Item # Softhead
|
£4.99 |
|
Loon Outdoor Thinners
Water based thinners for use with all Loon Head Finish and Hard Head products. More Info>>
Item # Loonthinners
|
£3.99 |
|
Loon UV Fly Paint
NEW AND EXCLUSIVE TO FLY ONLY A liquid polyurethane fluorescent fly paint and head finish that adheres to hackles, metal, and plastic. Cures in seconds in direct sunlight so you can change... More Info>>
Item # LUVFP
|
£4.99 |
|
Loon Outdoors UV Torch
Sets the UV Knot sense and UV Wader Patch on a dull day and even in the dark. More Info>>
Item # UVTorch
|
£8.99 |
|
Loon Outdoors UV Knot Sense
Although perhaps not what it was intended for, if you coat any part of a dressing with this product instead of epoxy, where that is required, and then hold under a UV Torch or direct sunlight it... More Info>>
Item # Uvknotsense
|
£4.50 |
|
Z-Poxy 5 min
This is definitely the best epoxy around today. You monitor the mix ratio. Z- Poxy comes in separate bottles. It is far cleaner than the Devcon type of dispenser. A little dearer... More Info>>
Item # ZPOX
|
£9.00 |
|
Zab-A-Dap-A-Goo
This glue is flexible when set. It is brilliant for sticking eyes to deer hair or bait patterns. As a bonus it will seal and patch waders too. More Info>>
Item # ZAPGO
|
£4.50 |
|
Zap Gel
The best glue for setting eyes on to your patterns. It will not run, or "string" and it sets on contact with the eyes. More Info>>
Item # PZG
|
£1.45 |
|
Watershed
A permanent waterproofing agent. One drop is all that is needed. It must be applied 24hrs before fishing or during the tying process. Can also be used on flies, materials, dubbings,... More Info>>
Item # Watershed
|
£5.00 |
|
Swax
Helps in the application of dubbing. Very, very tacky. Available as Low Tack for smaller flies, and High Tack for larger flies. More Info>>
Item # Swax
|
£3.99 |
|
Angling Glue
An excellent low viscosity glue that is perfect for bonding fly tying materials in place. Waterproof and flexible. More Info>>
Item # Anglinglue
|
£4.75 |
|
Devcon 5 Minute Epoxy
This special adhesive essential for forming epoxy head flies. Ideal for shrimp backs and any situation requiring a tough, transparent coating. Simply depress the plunger and mix the two liquids... More Info>>
Item # Devconepoxy
|
£5.20 |
|
Cobblers Wax
Cobblers wax is a dark coloured wax. As above, heat in your hands before applying to your thread. Ideal for North Country spiders. More Info>>
Item # Cobblerswax
|
£2.00 |
|
Prepared Fly Tyers wax
A specially prepared fly tyers wax. Simply heat in your hands to soften and then pull your thread through to apply before adding your dubbing. More Info>>
Item # Prepwax
|
£1.10 |
|
Floo Glue
For use when strength and flexibility is needed, ideal for dry fly wings, before and after tying. Simply spread a thin coat onto the material and allow to dry. More Info>>
Item # Flooglue
|
£4.75 |
|
Unitit Thinners
Unitit thinners can be used with the Cellaire varnish above. More Info>>
Item # Unitit
|
£1.50 |
|
Cellaire Varnish
Cellaire is a super quality varnish for all your fly tying needs, easily absorbed and quick drying. If it gets too thick it can be thinned with Unitit thinners. Available in Clear, Red and Black... More Info>>
Item # Cellaire
|
£1.50 |
